Cheat Codes – Black and Bruised PS2

Anyone with a PlayStation 2 were not made aware that to comfort the best in the world. I have my permanent Correct and at one point I went to the point of buying a second because I try to be so tired, my first solution was. One day my friend came by and we decided to fix my PS2, and now still works. About every few months or so I have only one correct test-do against it, but not so bad.
First, there are some elements who have for this operation, and are basically house hold items, most people around laying. What you need is:
A small Philips screwdriver. Although I could not find one of these times I have a sharp knife with a fine point. However, I do not recommend, what would ruin the screws.
-Q-tips/Swabs.
Denatured alcohol.
Dust-Buster / air
The first step to fix your PS2 is open. This transaction will void your warranty, I will notice it. Unplug all cables connected to the PS2. The next thing to do, remove your network card and hard drive (if applicable). How to put the network card, you can just turn one quarter to the screws. Order is the hard disk, there are two silver metal body and flaps on both sides of the network card and push it up the hard drive should run smoothly.
Further, there are a lot of tiny squares on the basis of your PS2 remove, you included with nail / screwdriver / etc. Each of these squares a screw blacks, and there are two different lengths of screws, Mark, although I know it must be if you made it. Whenever you take something apart, always with the possibility to record progress, to know how to do it together again. Then you have to remove the adhesive on one side of the PS2, to where it is. This will void the warranty, not to pursue further if you want it.
Remember: There should be no wires / controllers / anything connected to the PS2 to be in that time.
Now you want to move, carefully remove the top of the PS2. The lines for the power button and eject button to the upper part that you are connected to remove, so do not pull too hard and / or fast, this may lead to pull the wires, then you are in difficulties. Insert the tip of the PS2 next to the rest of the PS2, but keep it up, and make sure the top does not fall on the PS2 you put on the surface.
After removing the top of the PS2 carefully visible on top of the CD. to remove this beginning of the CD to solve the Philips screwdriver and the four bolts that the tip of the CD take the safe. These screws are very small, so interpret them in a bowl of white light color, not to lose. These screws are in terms of your PS2 works perfectly smoothly and much more. Now, with the top of the CD, you open a CD may be visible if you are in there, drop had, and blocking element that we receive. But to keep the CD to the proceedings if you are ready to test. Once the CD has moved half of the lens is visible, it is what we were looking for. If you do not know what is the lens, it is clear that a small circular object mounted on a black plastic surface. The goal is to read the CD.
Since the PS2 is already open, take the time to clear the dust PS2. Clean the areas of ventilation and the fan. The fan is difficult to clean because it is so easily moved, but the Council is kept in place and with a Q-tip to clean it. A Dust Buster or hose can be used to suck some dust as well be. However, I recommend air. went in. After all the dust, clean the outside of USB ports, controller ports, memory card ports and all ports on the back. Then back to work with the lens.
Now pour remove the cap from the top of the bottle of alcohol and alcohol. Then take a dab Q-Tip and some alcohol, not to wet the lens with it. Take the Q-tip and lightly dab the lens with her care that alcohol on the lens. Give the lens a bit "too dry (a few minutes should do it), and this is the end of the procedure.
To test to ensure that the work provided a CD on the tray and put the tip of the CD (if you do not have to do from the CD door swing). Now you can connect the power cable and video / audio and agreements. The top of the PS2 should not, again, that should be close to the PS2, but flick the power switch on the back, then press the restart (another key) to activate on the front of the system. Try the PS2 to get to read the disc, it should now. If not for reading the disc, so try again. If not, then, that there may be a different problem with the system.
Good luck to all and happy gaming!
Questions / comments? E-mail chem1calburn@yahoo.com